Hi Ruben Zimmermann I have followed your instructions as per the documentation however I’m not having a great deal of luck getting the MP to work.
See below my Screenshots. The two log files has the following content
Start Logging on 09/27/2018 16:17:47
Function-Name: Inital test. Err: BigIP: not reachable!
I have a MIB Browser utility and I can definitely get from the Monitoring Server to the F5’s and do an SNMP Walk.
The same applies for the Web Management
Any idea what might be the reason why this isn’t working?
Just updated them after reading your question here. – Sure about using the latest ones?
Certificate issues should be ignored. & For SNMP they are not involved as far I know.
Do you still get the same error text when running the scripts?
Hm. Could you try to just use the hostname instead of the FQDN?
Can you ping the appliance by just using the hostname?
In our case we’re using default ports for SNMP and HTTPS. – F5 is controlling from which IP ranges it allows the access.
Do you get values if you run this in a PowerShell session?
$F5BigIPHost = 'MyF5Appliance' $timeOut = 30 $oid = '.188.8.131.52.4.1.33184.108.40.206' #General Info #or $oid = '.220.127.116.11.4.1.3318.104.22.168' #product info & C:\usr\bin\snmpwalk.exe -v 2c -t $timeOut -c public $F5BigIPHost $Oid
Hi @Ruben Zimmermann sorry for not getting back to you sooner. I have been away on a mini break. I have run the script for both OID’s see below
Getting the following error when running the code line by line – something to do with “GET not implemented”? Is there something I need to enable on the F5?
I’ve been testing with the free ABC MP, however we went back to the HYCU F5 Big-IP MP for SCOM.
This because we also want to monitor Certificates,…
When we tried to add more oid to monitor, we had troubles finding the correct mib/oid. Next
to that we also use SNMP v3 and base SCOM network monitoring.
I have found the problem:-
The problem is that we do not allow ICMP Ping to our F5 devices therefore when these two scripts run they check to see if the hosts specified in the F5-BigIP-Hosts.csv are up via Test-Connection (PING)
I have amended the code on both scripts for where the scripts do a PING check:-
Here is the result for scanning two nodes
The only issue I have now is that nothing seems to be appearing in SCOM. The only thing that is populated is the MonitoringServer(Not Monitored)
I’ll be back in office on next Monday. Will feedback asap
can you find the value in <applianceName>_F5-Discovery-snmp-GeneralInfo.json?
Hi Ruben, The issue with the Appliance name was an error on my part – I didn’t extract the MIBs into the correct folder…
I wonder if you could shed some light on this issue?
We have 2 F5’s in site PW and 2 F5’s in site PB. I started setting up Site PW with WatcherPW (Server running script) – see below Fig 1 showing a health state for both PW1 and PW2 but nothing for BP1 and PB 2 as I have turned off the schedule on WatcherPB (Server running script)
After PW1 and PW2 were completely discovered and health state up-to-date I enabled the Schedule for Site PB to discover PB1 and PB2. See Fig 2 below – Now the health state for PW1 and PW2 have been discarded and PB1 and PB2’s health state is being represented. This has been like this for a few days and both site schedules are running perfectly.
It would seem that this applies to all the group health statuses – Node Addr Group, PoolsTatus Group and TrafficGroupItem Group
It seems the MP can’t represent both sites group statuses at the same time?
not sure if I understand you correct. Please confirm 🙂
You firstly exported the information for the first set of F5 waited until they have been discovered. Then you changed the scripts to discover the second set of F5 is that right?
If so I know the reason for the problem. You need to keep all F5 appliance been discoverable. – Configuration files and CSV need to keep. If you don’t SCOM will purge them from the database.
Let me know …
finally I got your point! At the moment I don’t have a clue why it behaves like you mention. I will do some research and come back to you 🙂
I’m working with our F5 guys to add DR set of appliances.- Then I will be able to test with our machines! 🙂
sorry for the late feedback. Even after adding a second monitoring server and another F5 I cannot reproduce the issue.
Currently I cannot find the time to check further.
I saw there is another free F5 MP in the mpcatalog. It looks nice, perhaps you can take a look?