We have about 1700 Cisco switches that is monitored on SCOM.

I have grouped it per building, so basically a building have 1 distribution switch and a few access switches connected to the main distribution switch.

If the distribution switch is down, then obviously the whole building’s network is down, while if 1 or even a few access switches are down, then only a percentage is up and percentage is down.

Is this possible to create a SCOM/SquaredUP dashboard with this logic.

Example Scenario (1 Distribution + 8 Access switches)

Distribution down = 100% down = show red

2 Access switches down = 25% down = show darker green

4 Access switches down = 50% down = show yellow

6 Access switches down = 75% down = show orange

8 Access switches down = 100% down – show red

Reivilo selected answer