# SCOM 1807 install

**URL:** <https://community.squaredup.com/t/scom-1807-install/840>\
**Category:** Dashboard Server\
**Tags:** scom\
**Created:** [October 29, 2018, 12:02pm UTC](https://community.squaredup.com/t/scom-1807-install/840 "2018-10-29T12:02:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![rtbywalski](https://community.squaredup.com/letter_avatar_proxy/v4/letter/r/b487fb/32.png) [@rtbywalski](https://community.squaredup.com/u/rtbywalski)\
**Post date:** [October 29, 2018, 12:02pm UTC](https://community.squaredup.com/t/scom-1807-install/840/1 "2018-10-29T12:02:44Z")

</div>

I remember from the whats new in 1807 webinar the statement was made that when upgrading to 1807 you should wait at least 24 hours between installing 1801 and 1807. I am doing a fresh install to stand up a new environment would that still be the case in that situation or could I install 1801 and then immediately install 1807.

---

<div class="post-metadata">

**Author:** ![Jelly](https://community.squaredup.com/user_avatar/community.squaredup.com/jelly/32/812_2.png) [@Jelly](https://community.squaredup.com/u/Jelly)\
**Post date:** [October 29, 2018, 12:26pm UTC](https://community.squaredup.com/t/scom-1807-install/840/2 "2018-10-29T12:26:51Z")

</div>

I believe it’s in any case. It’s not so much the 2012/r2/2016 \> 1801 \> 1807, but specifically going from 1801 \> 1807.

As you currently have to install 1801 and then upgrade to 1807, caution should be used, and allow that 24 hours between the upgrade.

Kevin Holman mentioned this somewhere, but I cannot find the source ☹

---

<div class="post-metadata">

**Author:** ![rtbywalski](https://community.squaredup.com/letter_avatar_proxy/v4/letter/r/b487fb/32.png) [@rtbywalski](https://community.squaredup.com/u/rtbywalski)\
**Post date:** [October 29, 2018, 12:32pm UTC](https://community.squaredup.com/t/scom-1807-install/840/3 "2018-10-29T12:32:42Z")

</div>

I was not sure if it would still apply since this is a brand new install of SCOM with no existing environment being upgraded. So I would be installing 1801 from the start then upgrading to 1807.

---

<div class="post-metadata">

**Author:** ![Jelly](https://community.squaredup.com/user_avatar/community.squaredup.com/jelly/32/812_2.png) [@Jelly](https://community.squaredup.com/u/Jelly)\
**Post date:** [October 29, 2018, 12:40pm UTC](https://community.squaredup.com/t/scom-1807-install/840/4 "2018-10-29T12:40:59Z")

</div>

I can’t recall if it’s something to do with the existing monitoring data or some background functions. Hopefully, someone else will be able to provide some better insight.
